While we don't have a way of knowing what awning you have, I can tell you how to choose the right replacement support arms, so long as your awning is a Solera awning. To do so, all you have to do is measure the length of the wall mount, which will tell you the correct size for the arm assembly, and what we have is the following:
- 69 Inches: Solera 69" Standard Flat Awning Support Arm # LC281154 view full answer...
It is very possible that the Dexter Heavy Duty Suspension Kit # K71-360-00 you were looking at will fit your 2008 Heartland RV Cyclone 5th Wheel Triple Axle Toy Hauler, but to confirm this you will want to measure the length of your existing equalizers and shackle straps.
This kit includes one equalizer that measures 5-3/4" between the two horizontal mounting holes on center, and another that measures 7" as shown in the included diagram. The included shackle straps measure 2-1/4" between... view full answer...
Absolutely; the correct Dexter self-adjusting electric trailer brakes that fit your 2016 Heartland Cyclone 4200 toy hauler are the following:
- Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-464-465
The # 23-464-465 includes both the left and right brake assemblies, though you will need the mounting hardware, which is the Mounting Bolts and Hardware # BRKH12.
Also, to connect the wires I recommend using the Deka Heat Shrink Butt Connectors # DW05745-5. These come in a pack of five... view full answer...
The length I'm seeing for your 2015 Heartland RV Cyclone 4200 5W Toy Hauler is 44' so I recommend the Classic Accessories PolyPRO 3 Deluxe Extra Tall 5th Wheel or Toy Hauler Cover - XT Model 7 Item # CA80-300-203101-RT. The triple-ply top and single-ply sides protect against rain, snow, dirt, nicks, and scratches for all-season protection. This cover also comes with zippered panels that allow access to the RV doors and engine areas and a rear zipper door to allow for toy hauler access. view full answer...
Which model Heartland Triple Axle Cyclone 5th Wheel toy hauler do you have?
The Roadmaster # RM-2460-2570-3 Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers will work if your toy hauler has 7K axles. There isn't a database that would allow me to look up which axles your toy hauler is equipped with, but there are a few things to look for that will confirm your axle capacity. A 7K axle typically uses a 3 inch diameter axle tube with spindles that use a 25580 inner and 14125A outer... view full answer...
To add a trailer hitch to your 2014 Heartland RV Cyclone 5th Wheel Toy Hauler you will need the Curt Adjustable Width Trailer Hitch Receiver for RVs item # 13703. This universal hitch can be bolted or welded on and it fits frames that are 22" to 72" wide. This hitch will fit Box, C-Channel and I-beam frames. I recommend checking your trailer frame for these specs to see if this hitch will fit. I have linked the installation instructions below.
You will need a bike rack rated to be hauled... view full answer...
The CrossBreeze is going to sit inside of the door opening on your toy hauler so you'll want to choose one as close to your opening width as possible. With your original header measuring 95" it's safe to assume you had the 96" # 3441409600PBK since the header will be smaller with the rails taking up the rest of the gap. view full answer...
The Lippert Center Point by Trailair Air-Ride Suspension Upgrade # LC1565401 fits most trailers but I do have some things for you to double check just to make sure this will fit your 2018 Heartland Cyclone 4250 triple axle.
Your leaf springs need to be 1-3/4" wide and then when it comes to the equalizer you need the top bolt for your equalizer needs to be at least 2-1/2" below your trailer frame and the lower bolts to be at least 3" in width.
I've attached a review video of the system... view full answer...
The replacement arm part # LC1134121 does fit your Lippert electric stabilizer with part number 113407 on it but we do not have the bolts you are looking for. Your best option might be to match up what you'd need at a local hardware store. view full answer...
The Trailair Flex Air 5th Wheel Pin Box # LC369535 you mention will replace Lippert 1621 pin boxes, so if you have a 1621 pin box this will work for you. If you are unsure which pin box you currently have, you should be able to locate the manufacturers name, along with the model number printed on a sticker usually on the pin box itself.
If you aren't able to locate any sticker information, then you're going to need to make a couple of measurements. You'll need to measure the horizontal... view full answer...
You're correct, the Timbren Axle-Less Trailer Suspension # TASR5200S03 is not designed to work with a triple axle suspension. You would have to replace your axle with a another axle of similar dimensions. If you still have the axle tag on the axle or any of the others I can look it up and find the correct replacement.
If not, you'll need to know the capacity of the axle and measure for the spring seat spacing and hub face to hub face. For axle capacity you'll want to measure the diameter... view full answer...
Unfortunately, when it comes to installing 5th wheel trailers on flatbed trucks there really aren't a lot of options besides flatbed specific hitches. The Pro Series slider hitch you acquired isn't going to be able to be installed on your flatbed 2012 Ram and you'll need a different hitch instead.
If you have a B&W gooseneck hitch in your flatbed then you could use the B&W Companion Flatbed Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3050.
If you have a standard gooseneck hitch... view full answer...
We have the exact kit you need to replace your bearings, races, and grease seal on your 2016 Heartland Cyclone 4200, which is the following:
- Bearing Kit # BK3-200
This kit is for one hub, so if you need to replace the bearings and seals on multiple hubs, just be sure to order the correct quantity. And then for grease I recommend the LubriMatic Grease # L11380 with Bearing Packer # ALL647646. view full answer...
Yes, the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger # PD9280A would be an exact replacement for your PD9280 converter.
If you weren't just going to replace it and were going to troubleshoot the issue I recommend checking the output of the converter. It could be that the internal Charge Wizard is bad and not correctly reading the charge of your battery and thus sending more power than necessary to charge your battery. To test the output of the converter you'll... view full answer...
The Furrion Chill Replacement RV Air Conditioner for Coleman Setup # FR42PV comes with a 6-pin adapter to make it compatible with other branded systems. You'll be able to plug it right into your existing system and use your thermostat to control the rooftop condenser unit. view full answer...
Go To Results